Bobcat+ 320
La série Bobcat+ 320 est conçue à partir d'un détecteur InGaAs stabilisé en température, développé en interne, avec une résolution de 320 x 256 pixels. Les caméras Bobcat+ 320 sont dotées d'une interface GigE Vision et offrent des fréquences d'images élevées allant jusqu'à 400 Hz. La nouvelle caméra Bobcat+ 320 améliorée dispose désormais de deux modes de gain (gain élevé et plage dynamique élevée) et de deux modes de lecture (IWR ou ITR). De plus, une version vSWIR est également disponible. Les caméras sont dotées d'une correction d'image intégrée standard comprenant la correction de la non-uniformité (NUC), le remplacement des mauvais pixels (BPR) et le contrôle automatique du gain (AGC). Pour plus d'informations sur les autres fonctions d'amélioration de l'image, contactez notre service commercial.
Bobcat+ 320
Contacter les ventes ou demander un devis
Contactez-nousSpecifications
| Mechanical Specifications | Bobcat+ 320 GigE 400 | Bobcat+ 320 GigE 400 vSWIR |
|---|---|---|
| Approximate dimensions - excluding lens [width x height x length] [mm] | 55 x 55 x 82 | 55 x 55 x 82 |
| Weight [gr] - excluding lens | 334 | 334 |
| Optical interface | C-mount or M42 | C-mount or M42 |
| Connector GigE | RJ-45 | RJ-45 |
| Connector CameraLink | - | - |
| Connector power | Hirose HR10-7R-SA[73] | Hirose HR10-7R-SA[73] |
| Connector trigger | SMA | SMA |
| Environmental & Power Specifications | Bobcat+ 320 GigE 400 | Bobcat+ 320 GigE 400 vSWIR |
|---|---|---|
| Operating case temperature [°C] | From -40 to +70; also available in temperature range 0 - 50 | From -40 to +70; also available in temperature range 0 - 50 |
| Storage temperature [°C] | From -45 to +85 | From -45 to +85 |
| Power consumption [W] | 4 [no TE cooler] | 4 [no TE cooler] |
| Power supply voltage | DC 12 V | DC 12 V |
| Shock | IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] | IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] |
| Vibration | Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] | Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] |
| IP rating | IP40 | IP40 |
| Regulatory compliance | CE, RoHS | CE, RoHS |
| Electro-Optical Specifications | Bobcat+ 320 GigE 400 | Bobcat+ 320 GigE 400 vSWIR |
|---|---|---|
| Image format [pixels] | 320 x 256 | 320 x 256 |
| Pixel pitch [µm] | 20 | 20 |
| Detector type | InGaAs photodiode array with CTIA ROIC | InGaAs photodiode array with CTIA ROIC |
| Sensor temperature stabilization | TE cooler | TE cooler |
| Integration type | Snapshot - global shutter | Snapshot - global shutter |
| Active area and diagonal [mm] | 6.4 x 5.12 [diagonal 8.2] | 6.4 x 5.12 [diagonal 8.2] |
| Optical fill factor | 100% | 100% |
| Spectral range [nm] | 900 - 1700 | 500 - 1700 |
| Quantum efficiency | ~80% [typical peak value] | ~80% [typical peak value] |
| Gain mode | High Gain [HG] & High Dynamic Range mode [HDR] | High Gain [HG] & High Dynamic Range mode [HDR] |
| Full well capacities [electrons] | 45k [HG] & 500k [HDR] | 45k [HG] & 500k [HDR] |
| Read noise [electrons] | 120 [HG] & 500 [HDR] | 120 [HG] & 500 [HDR] |
| Dark current [electrons/second] | <1E5 [at 288K sensor temp and 150mV reverse bias] | <2E5 [at 288K sensor temp and 150mV reverse bias] |
| Read out mode | ITR and IWR | ITR and IWR |
| Pixel operability | >99.5% | >99.5% |
| Preconfigured exposure time range [ms] | 0.1 to 40 in HG; 0.1 to 20 in HDR | 0.1 to 40 in HG; 0.1 to 20 in HDR |
| Max frame rate [Hz] [full frame] | 400 | 400 |
| Region of interest | Yes | Yes |
| Min region size [pixels] | 32 x 4 [step 16 x 4] | 32 x 4 [step 16 x 4] |
| Max frame rate [Hz] [min region size] | >10000 | >10000 |
| Analog-to-Digital [ADC] [bits] | 14 | 14 |
| Command and control | GigE Vision | GigE Vision |
| Digital output format | GigE Vision [16 bit] | GigE Vision [16 bit] |
| Trigger | In or out via SMA [Configurable] | In or out via SMA [Configurable] |