A copy of the Xeneth software is provided in a USB stick that accompanies the purchase of your camera.

In case you have misplaced the software, or would like to obtain newer versions of Xeneth/SDK, please contact us.

We will need you to provide the serial number of your camera to validate your purchase. The serial number can be found on the label, usually found at the back of the camera.

Our technical resources are located on the product page for the respective cameras. From our product catalog, look for the series your Xenics camera falls under.

Then, on the “Technical Resources” tab, you will find all the documents available for that product/camera.

If you do not find what you are looking for, no problem! Reach out to us and we will provide the specific documents or files you need.

The mechanical shutter is an internal reference which the microbolometer requires to compensate on e.g. pixel drifts. Basically it is a black reference which is put in front of the detector, which takes reference images and corrects the pixel drift.

By factory default the shutter is initialized when the temperature at the detector changes by 0,5°C. An additional timing elapse function is also implemented and can also be activated. When a camera has just been started it will get to his working temperature. During this time the detector will warm-up and will be shuttered several times to assure the quality of the image.

Today our XTM cores and Gobi cameras have microbolometer detectors on board which utilize a mechanical shutter.

NETD is one of the most important performance parameters for infrared imaging systems. It is a signal-to-noise figure which represents the temperature difference which would produce a signal equal to the camera’s temporal noise. In human language: NETD expresses the minimal resolvable temperature difference when the camera is used for relative imaging applications.

The thermal time constant τth of a bolometer is determined by the thermal mass C and by the thermal conductance G between the pixel and its environment. It expresses the physical time a bolometer needs to heat up and give an electrical output that equals or represents the input. Typical values for A-Si are between 7 and 10ms.

Researchers are exploring novel materials, device architectures, and fabrication techniques to address the technical challenges in single photon detection. This includes the development of new materials, such as 2D materials or perovskites, improved detector designs, advanced signal processing algorithms, and innovative cooling and shielding techniques. By pushing the boundaries of what is possible in single photon detection, researchers aim to unlock the full potential of this groundbreaking technology for a wide range of scientific and industrial applications.

Single photon detection has potential applications in a wide range of fields, including quantum communication and computing, biomedical imaging, LIDAR, astronomy, and remote sensing.
 

Current single photon detection technologies often struggle to achieve high performance across all relevant metrics, such as sensitivity, timing resolution, spatial resolution, and spectral resolution, without compromising on other aspects of detector performance.